Half Off Ponds PARP-60KDD2 3.9 CFM Aeration System with 2 Double-10 EPDM Diffuser
Half Off Ponds - PAPA-RP60KDD2 - Pro Aeration, Deep Water Subsurface Aeration Kit for Ponds and Lakes. The Half Off Ponds Aeration Compressors are high flow, high capacity air compressors ideally suited for lake and pond bottom aeration. Half Off Ponds Air Compressors operate on a 120-volt, 3.5-amp motor with a 6-foot double insulated power cord and are most efficient in 25-foot water depths, with a maximum operating depth of 40 feet. Air filter with replaceable, debris-trapping element delivers clean, pure air. These reliable, low maintenance units are designed for continuous or intermittent operation. Sealed connecting rod and bearing lubrication, oil-free air compressing chamber and shock-absorbing vibration-isolating mounts assure years of trouble-free operation on the 1/2HP, 3.9 CFM pond aeration compressor. The Half Off Ponds Aeration Compressor is used to help break down fish waste allowing natural gasses to harmlessly escape as well as help prevent the pond surface from freezing over in the winter months. Hand-selected components are durable, reliable, and low-maintenance.
The Pro Aeration, Deep Water Subsurface Kit delivers oxygen to create and maintain a healthy environment. PAPA-RP60KDD2 - Half Off Ponds Pro Aeration, Deep Water Subsurface Aeration Kit Includes. PA-RP60P - 1/2HP, 3.9 CFM Subsurface Rocking Piston Aeration Compressor.
200' of 3/8 self-sinking Half Off Ponds Weighted Black Vinyl Tubing. (2) Double-10 EPDM Self-Sinking Diffuser Disc Assemblies.Half Off Ponds PARP-60KDD2 3.9 CFM Aeration System w/ 2 Double-10 EPDM Diffuser. Complete system designed with our best components for circulation and increased oxygen content for a healthy pond environment. Includes: (1) 1/2HP Subsurface Compressor, (2) Double-10" EPDM Weighted Diffusers, 200' Coil of 3/8" Weighted Black Vinyl Tubing, and All Necessary Fittings & Hardware.
Dimensions: 1/2HP Rocking Piston Compressor (Length x Width x Height) - 9.75" x 6" x 8. FAQs & Calculations to Help Select the Correct Kit.
How Many Gallons of Water does My Water Feature Hold? Length x Width x Average Depth x 7.48 = Gallons Example: A rectangular pond 15' long, 10' wide and 1.5' Deep Pond is... 15' x 10' x 1.5' x 7.48 = 1683 Gallons. Length x Width x Average Depth x 0.8 x 7.48 = Gallons Example: An oval pond 15' long, 10' wide and 1.5' deep is... Length x Width x Average Depth x 7.48 =Gallons Example: 15' long, 10' wide and 1.5' Deep Pond 15' x 10' x 1.5' x 7.48 = 1683 Gallons.
Length x Width x Average Depth x 0.25 x 7.48 = GALLONS =Gallons Example: 15' long, 10' wide and 1.5' Deep Pond 15' x 10' x 1.5' x 7.48 = 1683 Gallons. How Big of a Pump Do I Need? Minimum pump size is determined by pond type, water volume, head height and friction loss.The minimum pump size recommendations are. Water Garden, Few Small Goldfish.
Circulate total pond water valoume every 2 hours. Example: 2,000 GPH pump for a 3000-gallon pond with 2' waterfall. Fish Pond, Several Small Fish. Circulate total pond water valoume every 1 hour.
Example: 3,800 GPH pump for a 3000-gallon pond with 2' waterfall. Koi Pond, Several Large Fish. Circulate total pond water valoume every 3/4 hours. Dynamic head pressure is found by taking the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1' for every 10' of tubing and 1' for every elbow or "T" fitting. Example: 3' (vertical height) + 2.5 (25' of tubing) + 2' (for 2 elbows) = 7.5' of Dynamic Head Pressure Note: It is important to take into consideration while calculating how much flow will be at the top of your waterfall by accounting for the head height due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump. What Size Tubing Do I Need? Customer service is our business.We have been satisfying fish pond, water garden, and backyard waterfall enthusiasts for over 25 years! We're glad to assist you with your pond building project - from start, to finish! The Half Off Ponds Team. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Ponds & Water Features\Pond & Fountain Fittings & Pump Parts".
The seller is "pond-depot" and is located in this country: US. This item can be shipped to United States.
- Brand: HALF OFF PONDS
- Type: Deep Water Subsurface Aeration System
- Water Type: Pond, All Water Types, Fresh, Marine
- Features: Easy Installation
- Material: Stainless Steel
- Item Height: 8 in
- Item Width: 7 in
- Assembly Required: Yes
- Compatible Brand: HALF OFF PONDS
- Item Weight: 85 lb
- MPN: PARP-60KDD2
- Mounting: Freestanding
- Color: Black
- Suitable For: Ponds, Aquarium, Fountain & Water Features, Koi Ponds
- Power Source: Electric
- Country/Region of Manufacture: Taiwan
- Maximum Flow Rate: 3.9
- Manufacturer Warranty: 2-Year Manufacturer's Warranty
- Model: PARP-60KDD2
- Voltage: 120v
- CFM @ 10 PSI: 3.5
- CFM @ 20 PSI: 3
- CFM @ 5 PSI: 3.9
- Cord Length: 6 ft.
- Diffusers Included: (2) Double-10 in. Weighted Diffusers
- Electric Current (Amps): 3.5 amps
- Hertz: 60 hz
- Noise Rating: 70 dB
- OEM Equivalent Part Number: PARP-60KDD2
- Part Number: PARP-60KDD2
- Running Amps: 3.5 amps
- Running Watts: 420 watts
- Typical Pond Size: 2 Acre
- Voltage / Hertz: 60 hz
- Volts: 120
- Watts: 420
- UPC: 602401445017