Pond Fountain Aerator

Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to


Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to
Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to

Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to  Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to

Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to. Scott Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to 125ft.

The original "Muck Mover" for 23+ years: now available with larger motor sizes! Dramatically improve water quality while safely removing sediment buildup: Move the muck! The Dock Mount Aquasweep can keep your waterfront, dock area or canal clean from algae, trash and decaying debris on the surface, while also forcefully blasting muck, silt, and decaying leaves off the bottom. High-velocity water propulsion pushes bottom debris 50 feet or more, away from your swimming area and boat lift. Designed for both fresh and salt water, the Aquasweep fully adjusts in any direction, making it the ideal solution for eliminating decaying bottom muck and floating surface algae.

The Aquasweep comes complete with a stainless steel mounting plate designed for many different dock styles, or a dock post mounting bracket designed to attach to a pole or post, along with a stainless steel yoke assembly that reaches a depth of 7 feet. The Aquasweep is manufactured utilizing a heavy-duty, 50 foot long 12-gauge, submersible power cable with a rugged, marine-grade, water-resistant plug. Runs on standard 110-volt power, so no special wiring or electrician is needed. The Aquasweep's 3450 rpm of power comes from a professional grade, fully submersible Franklin electric motor, available in both 110- and 230-volt styles. Don't be fooled by imitators!

Compare with other products and see why the Aquasweep far surpasses anything else on the market in both performance and quality. Here are some of the differences. The competition's thruster requires oil to be added and changed frequently.

The Aquasweep is maintenance free, and it's engineered for all water types and temperatures. The Aquasweep runs at 3450 rpms and has a 48 lb. The other guys, even utilizing their 1-hp motor, runs at under 2000 rpms. This amounts to the Aquasweep moving a much larger volume of water per hour, which means quicker results. The Aquasweep is designed to control where debris goes, theirs scatters debris in every direction, much like an outboard motor.

The water intake shield on the Aquasweep keeps debris out, and the automatic thermal overload shut down prevents motor damage in case water flow is restricted. The Aquasweep, including its motor, is manufactured with American-made stainless steel. The other units out there utilize galvanized metal and aluminum. The Aquasweep has been proven to blast muck and silt for more than 20 years.

All of the imitations have been on the market for just 5 years. We proudly manufacture the Aquasweep in the USA. To us, it's not just another SKU on a long list, but one that we know well and expertly support. The Aquasweep is designed for use in fresh or salt water. Our ½ hp motor is rated at 400 gallons-per-minute flow rate, pushes debris a minimum 50 feet.

Our ¾ hp motor is rated at 450 gallons-per-minute flow rate, pushes debris a minimum 60 feet. Our 1 hp motor is rated at 500 gallons-per-minute flow rate, pushes debris a minimum 75 feet. Moves muck and bottom debris up to 150 feet in diameter. Runs at a constant 3,450 RPM's, 48 pounds of thrust achieved with the ½ hp motor. Minimum water depth required is 12. ½ hp motor runs at 115 volts 10 amps, 680 watts. ¾ hp motor runs at 10.5 amps, 875 watts. 1 hp motor runs at 11.5 amps, 1095 watts. 12-gauge, submersible, 50-foot power cord with rugged Hubbell marine style plug included.

Over 7 feet in length, 55 pounds. Rugged, high-density polyurethane-and-stainless steel construction. We also have larger 230-volt motors, many variations of 3-phase and 50-Hz models available. We cannot guarantee product availability beyond this 25 day period. We'll send you tracking information allowing you to monitor your order from our door to yours.

We realize, however, that sometimes a product is not exactly what you expected. We recommend that you fully insure any item(s) that you return to us just to be safe. Important Notes for Our Canadian and International Customers.

Listing and template services provided by inkFrog. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Ponds & Water Features\Outdoor Fountains". The seller is "marvin_gardens_store" and is located in this country: US.

This item can be shipped to United States.
  1. Power Cord Lengths: 50 FT
  2. Brand: Scott Aerator Company
  3. Type: Ball Fountain

Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to  Scott Aerator Aquasweep Muck Blaster Pond Dock Mount 1 HP 230 Volt with 50ft to