Pond Fountain Aerator

Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1


Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1
Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1
Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1

Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1   Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1

Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. The Boilermaker 1-hp surface aerator is an improved, high-volume model designed for maximum oxygen transfer and water flow. The low-profile design of the Boilermaker creates the high-volume, "white boil" effect of highly aerated water with a minimal vertical display.

If pond health is your primary consideration, the Boilermaker's high oxygen transfer rates and large volume of water circulation make it an ideal selection. The Boilermaker works well as a pond de-icer in winter, too. The Scott Aerator Company has engineered all of its water features to eliminate the need for time-consuming, costly winterizing products and procedures. Simply leave your aerator or fountain in the water, turn the power supply off, and forget about it for the winter. Once the water thaws in the spring, re-establish power to the unit and you're good to go.

All components will withstand sub-zero conditions without damage. The Boilermaker is manufactured utilizing a stainless steel, oil-free, submersible motor, making it the most environmentally friendly water aerator on the market. There's no oil to change, no maintenance required, and no control box needed. Each Boilermaker comes standard with 70 feet of heavy-duty, 12-gauge, submersible power cord.

Greater lengths are also available. Please disconnect power source when swimmers are present.

Electric cable provided is 70 feet in length, 12-gauge submersible, with plug. Electric cable can be ordered in greater lengths. Approved for use in salt water.

Two 20-pound weights or concrete blocks required for anchoring (not included). Two nylon ropes required for anchoring (not included). 32-inch minimum pond depth required. Great for all pond sizes. Motor specs: 60 Hz, single phase, 10.0 amps, 680 watts.

Proudly made in the USA. All of our fountains, aerators, de-icers, muck-movers and sub-surface aerators are oil-free and require almost no maintenance. We cannot guarantee product availability beyond this 25 day period.

We'll send you tracking information allowing you to monitor your order from our door to yours. We realize, however, that sometimes a product is not exactly what you expected. We recommend that you fully insure any item(s) that you return to us just to be safe.

Important Notes for Our Canadian and International Customers. Listing and template services provided by inkFrog.


Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1   Scott Aerator Boilermaker Aerator Fountain 1 HP 230V With 100 ft. Power Cord 1